Ganzhou wardrobe production process steps are as follows:
First of all, to understand the needs of customers, determine the size of the wardrobe, style, color and other requirements. According to the needs of customers, designers make a preliminary design scheme, including the structure of the wardrobe, layout, etc., and then communicate with customers and confirm.
Step 2: Select materials
After determining the design, the appropriate materials need to be selected. According to the customer's needs and budget, choose the appropriate plate, hardware accessories and other materials. For customers with special requirements, you can also choose sheet metal or custom hardware accessories.
Step 3: Cut
After determining the material, the plate needs to be cut. According to the size requirements of the design scheme, the plate is cut. Under normal circumstances, the board of the wardrobe includes the main board, door panel, side panel, bottom plate, top plate, etc., which needs to be cut according to actual requirements.
Step 4: Processing
After the cutting of the plate is completed, the plate needs to be processed. It mainly includes the process of opening tenon, punching hole and sealing edge. Tenoning is the processing of the tenon notch of the plate to connect the plate. Punching is to process the holes on the plate to facilitate the installation of hardware accessories. Edge sealing is the sealing treatment of the edge of the plate to increase the beauty and protection of the plate.
Step 5: Assemble
After the processing of the plate is completed, it is necessary to assemble the wardrobe. According to the design scheme, the components are assembled and fixed with glue, screws and other tools. During the assembly process, attention needs to be paid to the connection between the plates and the structural stability to ensure the overall stability and durability of the wardrobe.
Step 6: Paint
After the assembly is completed, the wardrobe needs to be painted. Grinding treatment to remove burrs and unevenness on the surface of the plate, and then the coating process of primer, medium and top paint. The coating process needs to pay attention to the thickness of the coating, the uniformity of the coating and the drying time to ensure the quality of the coating effect.
Step 7: Install
After painting is completed, the wardrobe can be installed. According to the customer's needs and site conditions, the location and way of installing the wardrobe. In the installation process, it is necessary to pay attention to the horizontal and vertical degree of the wardrobe to ensure the safety and beauty of the wardrobe.
Step 8: Acceptance
In short, the wardrobe needs to be inspected. Customers can check and evaluate the appearance and structure of the wardrobe to ensure that the production process meets the design requirements and customer needs.
